See the Axesstel AXW-D800 settings here.Explore the functionalities of the Axesstel AXW-D800 router, including details about its default username, password, and IP address. Additionally, learn how to modify the IP and DNS settings. It’s crucial to differentiate between the Axesstel AXW-D800 and Axesstel AXV-D450 routers to avoid confusion. For further guidance, refer to the included user manual for the CDMA 1xEVDO Wireless Broadband Modem.
Axesstel AXW-D800 Settings
For the Axesstel AXW-D800, the default username and password are both “admin | admin.” The router’s likely default IP 
can be 192.168.0.1, 192.168.1.1, or 10.0.0.1. This IP could be either a default setting or a choice made during previous IP address modifications.
To alter the router’s default IP, log in using the provided credentials. Access the “Network” section and locate the LAN settings. Here, change the router’s IP and save the settings. Ensure the Subnet Mask remains at 255.255.255.0 and the DHCP Server stays enabled. After making changes, reboot the router to apply the modifications effectively. See also the Axesstel MV400 Router Settings as well as the Axesstel D8190AF Settings and D-Link Routers AirPlus Settings.
Changing the DNS settings follows a similar process. Login using the default IP, username, and password. Navigate to the “network” section and modify the primary and secondary DNS addresses as indicated.
For Google Public DNS, use the following settings:
Primary: 8.8.8.8 Secondary: 8.8.4.4
For OpenDNS, configure the following:
Primary: 208.67.222.222 Secondary: 208.67.220.220
These DNS configurations enhance your internet experience. Remember, these instructions pertain specifically to router settings and do not involve UART issues. If you need information on UART drivers, such as the ft232r USB UART driver, explore the relevant sections of this platform.
