Driver : Genius GF100TXRIII Driver for Windows


Driver for Windows 9X/ME/2000/NT


******************************************************
* *
* Genius GF100TXRIII PCI FAST ETHERNET ADAPTER *
* *
* SOFTWARE DRIVER RELEASE DISKETTE *
* *
* V1.00 11-09-2000 *
* *
******************************************************


--------------------------------------------------------------------
Files and
Subdirectories Description
--------------------------------------------------------------------

RELEASE.TXT This file. Presents a summary of the contents
of your Driver Diskette.

README.TXT It includes instructions & Troubleshooting Guide
for adapter installation.

SETUP.EXE Setup and diagnostics program.

NETRTS.INF Windows 95 driver installation information file.

OEMSETNT.INF Windows NT 3.51 and NT 4.0 driver installation
information file.

\WINME Subdirectory for Windows ME

\NETWARE Subdirectory for Novell NetWare ODI Drivers

\410NLM Subdirectory for Novell Server 4.10 MSM, NBI modules

\DOSODI Subdirectory for Novell NetWare DOS/ODI driver

\OS2ODI Subdirectory for Novell NetWare OS2/ODI driver

\PKTDRV Subdirectory for Packet Driver

\NDIS2 Subdirectory containing programs and installation
instructions for using the NDIS/2 driver under the
following programs:

* Microsoft Windows for Workgroups
* SUN PC-NFS
* IBM LAN Server
* Microsoft LAN Manager
* Microsoft Network Client 3.0
* ARTISOFT LANtastic
* Banyan VINES
* DEC PATHWORKS

\MSLANMAN.DOS Subdirectory for DOS NDIS drivers for Microsoft LAN
Manager; the text file for instructions to install the
driver is in the directory \NDIS2. (LANMAN.TXT)

\MSLANMAN.OS2 Subdirectory for OS2 NDIS drivers for Microsoft LAN
Manager; the text file for instructions to install the
driver is in the directory \NDIS2. (LANMAN.TXT)

\WFW311 Subdirectory for NDIS/3 driver for Windows for
Workgroups 3.11.

\WIN95 Subdirectory for NDIS/3 driver for Microsoft
Windows 95 and Windows 95 OSR2

\WIN98 Subdirectory for NDIS/5 driver for Microsoft
Windows 98 on x86 platform.

\WINNT Subdirectory for NDIS/4 driver for Windows NT 4.0
on x86 platform.

\WIN2000 Subdirectory for Windows 2000

\SCO
\3.X Subdirectory for SCO Unix 3.2.4 driver.

\5.X Subdirectory for SCO Unix 5.0 driver.

\LINUX Subdirectory for LINUX driver.


\UW.7 Subdirectory for SCO UNIXWARE 7 driver.

--------------------------------------------------------------------


*** All trademarks or brand names mentioned are trademarks or
registered trademarks of their respective companies.

***************************************************
* *
* Genius GF100TXRIII PCI FAST ETHERNET ADAPTER *
* TROUBLESHOOTING DOCUMENT *
* *
***************************************************


How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow the following steps to configure the PCI slot:
a) You should know which slot your adapter is plugged into.
Look for the physical location of the slot on your PCI
motherboard.
b) Set "this device" to "Enable".
c) Set "this item" to "Master".
The PCI adapter MUST be installed in an expansion
slot that supports "Bus Master" mode.
Refer to your system documentation to determine which slots
support Bus Mastering.
d) Some BIOS Setups allow you to select which interrupt line
you can use. In our case, select "INT A" for "this item".
e) Select an IRQ of your choice, and make sure it does not conflict
with existing IRQs in use.
d) Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple PCI adapters can share the same PCI interrupt
and all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette.
If a problem arises during the installation, contact your dealer
for support.



Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.


Driver : Genius GF100TXRIII Driver for Windows