Driver : Realtek RTL8100E/RTL8101E/RTL8102E-GR Win

Realtek RTL8100E/RTL8101E/RTL8102E-GR Driver Auto Installation 6.84 Windows 98SE/ME/2000/XP/XP x64. Auto installation program (support WinXP 64/Win98SE/WinME/Win2K/WinXP ver.684) (Submission ID: 1274778).

Realtek = "Realtek Semiconductor Corp."
VLanTagging = "802.1Q/1p VLAN Tagging"
;VLanID = "802.1Q VLAN ID"
ChecksumOffload = "Offload Checksum"
LargesendOffload = "Offload TCP_LargeSend"
SpeedDuplexMode = "Link Speed/Duplex Mode"
auto_nego = "Auto Negotiation"
sd10half = "10Mbps/Half Duplex"
sd10full = "10Mbps/Full Duplex"
sd100half = "100Mbps/Half Duplex"
sd100full = "100Mbps/Full Duplex"
sd1000full = "1000Mbps/Full Duplex"
NetworkAddress = "Network Address"
JumboFrame = "Jumbo Frame"
;TxDescNumber = "Number of Tx Descriptor"
;RxDescNumber = "Number of Rx Descriptor"
;TxHPQDescNumber = "Number of High Priority Tx Descriptor"
FlowControl = "Flow Control"
;AutoSpeedDown = "Auto Speed Down"
S5WakeOnLan = "Wake-On-Lan After Shutdown"
10MbFirst = "10 Mbps First"
100MbFirst = "100 Mbps First"
NotSpeedDown = "Not Speed Down"
WolShutdownLinkSpeed = "WOL & Shutdown Link Speed"
AutoCrossoverDet = "Auto Crossover Detection"
Disabled = "Disable"
Enabled = "Enable"
TxChecksumEnabled = "Tx Checksum"
RxChecksumEnabled = "Rx Checksum"
TxRxChecksumEnabled = "Tx/Rx Checksum"
2KBMTU = "2KB MTU"
3KBMTU = "3KB MTU"
4KBMTU = "4KB MTU"
5KBMTU = "5KB MTU"
6KBMTU = "6KB MTU"
7KBMTU = "7KB MTU"
8KBMTU = "8KB MTU"
9KBMTU = "9KB MTU"
WolCap = "Wake-On-Lan Capabilities"
None = "None"
PatternMatch = "Pattern Match"
MagicPacket = "Magic Packet"
PatternAndMagic = "Pattern Match & Magic Packet"

;;Source disk name
DISKNAME = "Realtek 10/100/1000 NIC Family all in one NDIS Driver"

RTL8168.DeviceDesc = "Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC"
RTL8168C.DeviceDesc = "Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC"
RTL8136.DeviceDesc = "Realtek RTL8139/810x Family Fast Ethernet NIC"
RTL8102.DeviceDesc = "Realtek RTL8102E Family PCI-E Fast Ethernet NIC"

;;NT service name
Rtlnic.Service.DispName = "Realtek 10/100/1000 PCI-E NIC Family NT Driver"
Rtlnicxp.Service.DispName = "Realtek 10/100/1000 PCI-E NIC Family NDIS XP Driver"
Rtlnicx64.Service.DispName = "Realtek 10/100/1000 PCI-E NIC Family NDIS XP(x64) Driver"


Driver : Realtek RTL8100E/RTL8101E/RTL8102E-GR Win